PSD

(R3.2) Residential: Efficient Forced Air Distribution (Pt 2)
2022-09-28 10:15 - 11:45 (America/New_York) | ONLINE – WEBINAR
NYSERDA Energy Code Training provided by Performance Systems Development
R3.2 Residential: Efficient Forced Air Distribution Part 2 T02-07-2862
COST:
Free registration for New York Code Officials.*
Use discount code: NYCEO
*For use by New York Code Officials only.
All Others: $15.00
CONTINUING EDUCATION:
Architects: 1.5 AIA LU | HSW
Home Performance Contractors: 1.5 BPI CEUs
Code Enforcement Officials: 1.5 NYS DOS In-Service Hours
To receive credit, participants must log into the GoToWebinar application within the first 15 minutes of the training and stay until the end of the webinar. VIDEO VIEWING IS REQUIRED!
COURSE DESCRIPTION
In this course attendees will understand the importance of duct testing, sealing, and installation on the total performance of a house heating and cooling system. Attendees will be able to distinguish various code requirements based on duct proximity to the building thermal envelope. In addition, attendees will learn duct insulation requirements and methods. Attendees will be introduced to a customizable Duct and Envelope Testing (DET) reporting form to make demonstrating code compliance straightforward and efficient.
Learning Objectives:
1. Understand the consequences of leaky duct systems
2. Understand how to achieve tight ducts
3. Identify and resolve other common duct installation problems
4. Utilize the provided duct and envelope testing (DET) form to document or verify compliance with duct testing requirements

R3.1 - Air Barrier and Insulation Installation
2022-09-28 13:00 - 14:00 | ONLINE – WEBINAR
Make sure to use the GoToWebinar link to obtain video access, this is required and verified for CEU credit. VIDEO VIEWING IS REQUIRED!
CEU’s: 1 CSL (Topic – Energy), 1 AIA 1 BPI 1 Building official
Description:
The installation of a continuous air and thermal barrier is perhaps the best and most cost-effective way to reduce energy waste and save money on utility bills; at the same time, important details are often missed. This course will be framed around the 2018 IECC Air Barrier and Insulation Installation criteria found in Table 402.4.1.1 with photos and graphics to illustrate noncompliant and compliant installation of critical details like attic penetrations, wall-to-ceiling transitions, rim joists, garage walls, knee walls, and tubs and showers on exterior walls. Installing and inspecting insulation to meet code and manufacturer requirements will also be discussed.

(R4.0) Electrifying the Energy Code - Residential
2022-09-28 13:00 - 14:30 | ONLINE – WEBINAR
NYSERDA Energy Code Training provided by Performance Systems Development
Residential – Electrifying the Energy Code T02-07-3133
COST:
Free registration for New York Code Officials.*
Use discount code: NYCEO
*For use by New York Code Officials only.
All Others: $15.00
CONTINUING EDUCATION:
Architects: 1.5 AIA LU | HSW
Home Performance Contractors: 1.5 BPI CEUs
Code Enforcement Officials: 1.5 NYS DOS In-Service Hours
To receive credit, participants must log into the GoToWebinar application within the first 15 minutes of the training and stay until the end of the webinar. VIDEO VIEWING IS REQUIRED!
COURSE DESCRIPTION
Following an introduction to the benefits of electrification, this course will review the requirements of IECC Appendix RA (Solar-Ready Provisions) along with related requirements including mandatory access and set back areas required by the Fire Code of New York State in Section 1204 Solar Photovoltaic Power Systems. The course will walk through several examples and ask attendees to determine whether the solar-ready provisions apply to a particular building, given its type, orientation, roof design and other considerations. The course will also review examples of how to fit in the required solar ready zone considering obstructions and required setbacks. Example documentation will also be reviewed. Finally, the course will cover the electric vehicle service equipment capable requirements of NYStretch and how adopting these provisions will help with the electrification of New York’s transportation system.
Learning Objectives
1- Describe the concept of beneficial electrification
2- Identify and describe energy code provisions that promote beneficial electrification
3- Understand relevant requirements from the Fire Code of New York State
4- Describe the various systems involved in NYStretch and IECC Appendix RA

C4.3 - Designers, Builders, and Code Officials Working Together
2022-09-28 14:05 - 15:05 | ONLINE – WEBINAR
Make sure to use the GoToWebinar link to obtain video access, this is required and verified for CEU credit. VIDEO VIEWING IS REQUIRED!
CEU’s: 1 CSL (Topic – Energy), 1 AIA, 1 BPI, 1 Code Official
Com Designers, Builders, & Code Officials Working Together
The role of architects and designers versus builders and building owners regarding energy code compliant design and construction is not always clear. Architects and designers are responsible for providing compliant drawings but may not be tasked with handling third-party documentation or on-site supervision. Conflicts may arise when these roles are not clearly delineated in the scope of work. This module will cover various energy code documentation requirements and construction supervision duties and present various models and best practices for who is responsible for what. Code officials will also benefit from this session by gaining a more thorough understanding of documentation and verification processes.

(C4.1) Electrifying the Energy Code - Commercial Part 1
2022-09-28 14:45 - 16:15 | ONLINE – WEBINAR
NYSERDA Energy Code Training provided by Performance Systems Development
C4.1- Electrifying the Energy Code- Part 1 T02-07-3134
COST:
Free registration for New York Code Officials.*
Use discount code: NYCEO
*For use by New York Code Officials only.
All Others: $15.00
CONTINUING EDUCATION:
Architects: 1.5 AIA LU | HSW
Home Performance Contractors: 1.5 BPI CEUs
Code Enforcement Officials: 1.5 NYS DOS In-Service Hours
To receive credit, participants must log into the GoToWebinar application within the first 15 minutes of the training and stay until the end of the webinar. VIDEO VIEWING IS REQUIRED!
COURSE DESCRIPTION:
The first part of the program will cover IECC Appendix CA: Solar-Ready Zone along with related requirements including mandatory access and set back areas required by the Fire Code of New York State in Section 1204 Solar Photovoltaic Power Systems. This section will also discuss what it means to include a “collateral dead load” in gravity and lateral design calculations for the roof.
Learning Objectives:
1- Describe the concept of beneficial electrification
2- Identify and describe energy code provisions that promote beneficial electrification
3- Understand relevant requirements from the Fire Code of New York State
4- Describe the various systems involved in NYStretch Appendix CC: Additional Power Distribution Packages.

(C2.1) Prioritizing ECCCNYS Enforcement for Commercial Buildings (Pt 1)
2022-09-29 08:30 - 10:00 | ONLINE – WEBINAR
NYSERDA Energy Code Training provided by Performance Systems Development
C2.1 Prioritizing ECCCNYS Enforcement for Commercial Buildings (Pt 1) Envelope T02-07-2940
COST:
Free registration for New York Code Officials.*
Use discount code: NYCEO
*For use by New York Code Officials only.
All Others: $15.00
CONTINUING EDUCATION:
Architects: 1.5 AIA LU | HSW
Home Performance Contractors: 1.5 BPI CEUs
Code Enforcement Officials: 1.5 NYS DOS In-Service Hours
To receive credit, participants must log into the GoToWebinar application within the first 15 minutes of the training and stay until the end of the webinar. VIDEO VIEWING IS REQUIRED!
COURSE DESCRIPTION
In a robust study of commercial buildings, 21% of the energy code provisions investigated were responsible for 81% of the potential savings. This created a framework for prioritizing energy code enforcement efforts based on the time it takes to verify a code provision versus the energy savings potential. With code enforcement officials being strapped for time and having other life-health safety priorities, this course, Part 1 of a two-part series, covering high-impact commercial envelope requirements, will help them prioritize efforts, improve compliance, and maximize the realization of savings inherent in the energy code.
Learning Objectives:
1. Identify energy code envelope requirements with the greatest energy impacts and prioritize energy code documentation
2. Describe a process for creating and reviewing plans that includes documenting and assessing the highest impact energy code provisions related to envelope
3. Understand how to integrate provided construction details verification forms and checklists into normal compliance documentation or enforcement processes
4. Identify permit application specifications that enable a simplified plan review process as well as a process for providing or collecting verification forms

The 2018 IECC for Pennsylvania - Residential
2022-09-29 08:30 - 11:45 | ONLINE – WEBINAR
Description:
The 2018 IECC went into effect on February 14, 2022, bringing with it significant energy savings, mainly from improved envelope tightness. This training will include a high-level review of building science concepts including basic thermodynamics (how heat moves), including stack effect, and conditions that result in optimum occupant comfort. The program will focus on high-impact energy code provisions and items with relatively high noncompliance as found by a DOE/PNNL field study completed in 2018. Specific topics will include envelope insulation, air sealing, and testing, whole-house mechanical ventilation, HVAC equipment sizing, duct insulation, sealing, and testing, and service hot water pipe insulation and circulating system controls. Instructors will also present the use of checklists and third-party verification forms.
Learning objectives:
1. Identify significant changes between the 2015 and 2018 IECC
2. Describe the science behind building energy efficiency and occupant comfort and productivity
3. Identify the energy code provisions with high impact but low compliance rates
4. Understand how reduced air infiltration rate requirements will impact design, construction, and code enforcement
Continuing education: Three (3) hours. PA UCC, ICC, AIA LU|HSW, NARI, RESNET, BPI

(C2.2) Prioritizing ECCCNYS Enforcement for Commercial Buildings (Pt 2)
2022-09-29 10:15 - 11:45 | ONLINE – WEBINAR
NYSERDA Energy Code Training provided by Performance Systems Development
C2.2 Prioritizing ECCCNYS Enforcement for Commercial Buildings Pt 2
T02-07-2947
COST:
Free registration for New York Code Officials.*
Use discount code: NYCEO
*For use by New York Code Officials only.
All Others: $15.00
CONTINUING EDUCATION:
Architects: 1.5 AIA LU | HSW
Home Performance Contractors: 1.5 BPI CEUs
Code Enforcement Officials: 1.5 NYS DOS In-Service Hours
To receive credit, participants must log into the GoToWebinar application within the first 15 minutes of the training and stay until the end of the webinar. VIDEO VIEWING IS REQUIRED!
COURSE DESCRIPTION:
In a robust study of commercial buildings, 21% of the energy code provisions investigated were responsible for 81% of the potential savings. This created a framework for prioritizing energy code enforcement efforts based on the time it takes to verify a code provision versus the energy savings potential. With code enforcement officials being strapped for time and having other life-health safety priorities, this course, Part 2 of a two-part series, covering high-impact commercial mechanical and lighting requirements, will help them prioritize efforts, improve compliance, and maximize the realization of savings inherent in the energy code.
Learning objectives:
1- Identify the energy code requirements with the greatest energy impacts and prioritize energy code documentation
2- Describe a process for creating and reviewing plans that includes documenting and assessing the highest impact energy code provisions
3- Understand how to integrate provided construction details verification forms and checklists into normal compliance documentation or enforcement processes
4- Identify permit application specifications that enable a simplified plan review process as well as a process for providing or collecting verification forms

(C3.2) - What makes a Commercial air barrier, it’s in the details
2022-10-06 13:00 - 14:00 | ONLINE – WEBINAR
Make sure to use the GoToWebinar link to obtain video access, this is required and verified for CEU credit. VIDEO VIEWING IS REQUIRED!
CEU’s: 1 CSL (Topic – Energy), 1 AIA, 1 BPI, 1 Code Official
Commercial Webinar – What makes a Commercial air barrier, it’s in the details
COURSE DESCRIPTION:
Continuous air barriers are required by code and paramount to the energy efficiency of a building. There are numerous ways to provide a code-compliant air barrier system, including building wraps, sealed sheathing systems, and liquid- and spray-applied materials. This course will focus on the design and application of those systems, details important to the success of an air barrier system, and where designers and code officials can find additional support. The course will also provide tips on how to review construction details for air barrier continuity and how to inspect them in the field.
Learning Objectives:
1- Air Barrier Basics & Refresher​
2- Air Barriers and Building Science​
3- Key Requirements​
4- Design Considerations​
5- Installation Details ​

(C4.1) - Documentation for Energy Code Permit Applications
2022-10-18 13:00 - 14:00 | ONLINE – WEBINAR
Make sure to use the GoToWebinar link to obtain video access, this is required and verified for CEU credit. VIDEO VIEWING IS REQUIRED!
CEU’s: 1 CSL (Topic – Code), 1 AIA, 1 BPI, 1 Code Official
A significant barrier to energy code enforcement and verification in Massachusetts is the poor documentation of those code requirements on plans and permit application materials. This energy code documentation module will run through what code officials should ask for, and what designers or other permit applicants (GCs, builders) should submit, in terms of proper documentation for permit applications. Handouts include Commercial Permit Applicant Documents Checklists and Plan Review Documentation Checklists to work with along with the presenter. This session will walk through the checklist, COMcheck reports and the reasons behind their requirement by the code and their best usage in plan review and site inspection.

(C4.2) - Third-Party Documentation & Does LEED = Code?
2022-10-19 13:00 - 14:00 | ONLINE – WEBINAR
Make sure to use the GoToWebinar link to obtain video access, this is required and verified for CEU credit. VIDEO VIEWING IS REQUIRED!
CEU’s: 1 CSL (Topic – Energy), 1 AIA, 1 BPI, 1 Code Official
Third party providers can fulfill a variety of code compliance tests and measures with specialized expertise that may not be available or feasible for the design and construction teams. This presentation will discuss minimum third-party documentation for commercial code compliance, including commissioning reports, air barrier test reports, and building energy simulations for performance-path compliance. Noting that many construction and renovation projects may simultaneously pursue LEED or ENERGY STAR® certification, we will also compare these certifications’ energy performance standards with those required by the current Massachusetts energy code (780 CMR 9th edition) to explore the question of whether environmental building certifications are equivalent to code-compliant buildings. We will also provide guidance to assure that special inspections, tests, and certifications are documented for ease of compliance review and verification, and how construction professionals can assure that everyone is on the same page, and path, to compliance.

C7.1 - Building Systems Commissioning: Saving Money and Meeting Code
2022-10-20 13:00 - 14:00, 2022-11-17 13:00 - 14:00 | ONLINE – WEBINAR
Make sure to use the GoToWebinar link to obtain video access, this is required and verified for CEU credit. VIDEO VIEWING IS REQUIRED!
CEU’s: 1 CSL (Topic – Code), 1 AIA, 1 BPI, 1 Code Official
Commercial Webinar – Building Systems Commissioning: Saving Money and Meeting Code
COURSE DESCRIPTION:
Building commissioning reduces energy bills, improves comfort, reduces CO2 and other emissions, and… it is the law. According to data from US Energy Information Administration (EIA), in 2018 commercial buildings accounted for over 18% of the energy consumed in the US, with over half that energy dedicated to heating, cooling, and lighting. While most building owners and builders understand the importance of high-efficacy lighting and efficient HVAC systems, the importance of building system commissioning is less widely appreciated. Studies have shown that the operating efficiency of commercial buildings improves by as much as 13% with commissioning.
This course will provide an overview of mechanical systems and lighting commissioning including the benefits to building owners and occupants, the general commissioning process, and a review of energy code requirements and associated documentation. The course will also identify the roles that building owners, builders, code officials, and commissioning agents play in the commissioning process and highlight relevant industry standards and certifications.
LEARNING OBJECTIVES:
Attendees will be able to…
1. Describe the code requirements for building systems commissioning.
2. Understand the different phases of the commissioning process.
3. Identify the roles of building owners, commissioning providers, builders, and building code officials.
4. Provide and review the required commissioning documentation.

ENERGY STAR Certified Homes
2022-10-24 10:00 - 14:30, 2022-10-25 10:00 - 14:30
To begin or maintain an active partnership with ENERGY STAR, an organization must have at least one individual on staff who is a certified Rater and has completed the required training through an accredited training provider. This training is for the ENERGY STAR Certified Homes Version 3.1 training. The test will be given following the final day of training.
Classes will be Monday & Tuesday (10/24-10/25) from 10 AM EST to 2:30 PM EST.
The exam will be on Tuesday (10/25) immediately following class. Exams will be from 2:30 PM EST to 4:30 PM EST.

ENERGY STAR Multifamily New Construction and Certified Homes
2022-10-24 10:00 - 14:30, 2022-10-25 10:00 - 14:30, 2022-10-26 10:00 - 14:30, 2022-10-27 10:00 - 14:30, 2022-10-28 10:00 - 14:30
To begin or maintain an active partnership with ENERGY STAR, an organization must have at least one individual on staff who is a certified Rater and has completed the required training through an accredited training provider. This training combines the ENERGY STAR Certified Homes Version 3.1 training with the Multifamily New Construction ENERGY STAR Version 1.1 Training required by January 1, 2020. This training meets this requirement, and will earn you enough PDHs to renew your Rater Certification for 3 years!
ENERGY STAR Certified Homes – Monday & Tuesday (10/24-10/25). The exam will be on Tuesday (10/25) following the class.
ENERGY STAR Multi-Family New Construction – Wednesday through Friday (10/26-10/28). The exam will be on Friday (10/28) following the class.
Classes daily from 10 AM EST to 2:30 PM EST. Exams will be from 2:30 PM EST to 4:30 PM EST

ENERGY STAR Multifamily New Construction Rater Training
2022-10-26 10:00 - 14:30, 2022-10-27 10:00 - 14:30, 2022-10-28 10:00 - 14:30
To begin or maintain an active partnership with ENERGY STAR, an organization must have at least one individual on staff who is a certified Rater and has completed the required training through an accredited training provider. Effective January 1st 2020, Raters must complete the MFNC Version 1.1 Training prior to certifying projects in the new Multifamily New Construction ENERGY STAR program. This training meets this requirement, and will earn you enough PDHs to renew your Rater Certification for 3 years! Test will be given following the final day of training.
CONTACT US ABOUT GROUP TRAINING
Classes will be Wednesday through Friday (10/26-10/28) from 10 AM EST to 2:30 PM EST.
The exam will be Friday (10/28) immediately following class and last 2 hours.

R3.2 Whole-House Mechanical Ventilation: Options for Code Compliance
2022-10-26 13:00 - 14:00 | ONLINE – WEBINAR
Make sure to use the GoToWebinar link to obtain video access, this is required and verified for CEU credit. VIDEO VIEWING IS REQUIRED!
CEU’s: 1 CSL (Topic – Code), 1AIA, I BPI, 1 Code Official
COURSE DESCRIPTION:
Mechanical ventilation is as important to indoor air quality as it is for energy conservation. The second part of the course will cover 2018 IECC, IRC, and Massachusetts amendments relating to whole-house mechanical ventilation system requirements. This will include when whole-house ventilation is required, how to calculate the minimum design airflow rate, and how to verify installed airflow rates. The presenter will also provide an overview of different ventilation systems – exhaust only, supply-only and balanced ventilation (including ERVs/HRVs) – along with pros and cons of each type of system.
LEARNING OBJECTIVES:
Ventilation Types
Why Ventilate
Calculating Ventilation amount

R4.4 - The Massachusetts Stretch Energy Code for HERS Raters
2022-10-26 13:00 - 16:15 | ONLINE – WEBINAR
Make sure to use the GoToWebinar link to obtain video access, this is required and verified for CEU credit. VIDEO VIEWING IS REQUIRED!
CEU’s: 3 AIA, 3 BPI, 3 Code Official
COURSE DESCRIPTION:
Massachusetts Stretch Energy Code incorporates a blend of energy rating requirements and International Energy Conservation Code (IECC) requirements, which often leads to confusion. This course covers the requirements of the Energy Rating Index (ERI) path, as amended by Massachusetts, and IECC “mandatory” requirements. This course, specifically designed for HERS Raters, reviews details of the ERI path, including rating standard options, renewable energy bonuses, and verification and documentation requirements. It will also discuss every IECC requirement that is mandatory under the ERI path, including envelope, mechanical system, service hot water, and whole-house mechanical ventilation. The Stretch Code requires a completed ENERGY STAR Thermal Enclosure System Checklist, and this course will provide a review of the items required on this checklist in comparison to the IECC Air Barrier and Insulation Installation Criteria, which are also required. The course will also describe duct leakage testing requirements, including IECC and RESNET 301 testing exemptions and related modeling issues. Finally, the course will briefly touch on the alternative ERI path (ENERGY STAR Homes and Passive House), EV-Ready requirements, and solar-ready requirements.

(C5.1) - 2018 IECC Update
2022-10-26 14:05 - 15:05 | ONLINE – WEBINAR
Make sure to use the GoToWebinar link to obtain video access, this is required and verified for CEU credit. VIDEO VIEWING IS REQUIRED!
CEU’s: 1 CSL (Topic – Energy), 1 AIA, 1 BPI, 1 Code Official
Description:
The International Energy Conservation Code (IECC) is updated every three years to address technological innovations and keep driving the effective use of energy in buildings. Massachusetts legislation requires the Commonwealth to adopt the latest version of the IECC within a year of its publication. While the adoption has not always occurred on schedule, the Board of Building Regulations and Standards is actively reviewing the 2018 IECC with an eye to adopt in the first half of 2019. This webinar will provide a look ahead to the 2018 IECC by highlighting significant changes from the 2015 IECC, including new provisions relating to buried ducts, the building thermal envelope, mechanical ventilation, updated lighting requirements and changes to the energy rating index compliance alternative.
Learning Objectives:
1-Explain the Massachusetts commercial energy code adoption process
2-Discuss how the ICC develops the IECC
3-Identify the key changes between the commercial provisions of the 2015 IECC and the 2018 IECC
4-Discuss the Massachusetts amendments to the 2018 IECC

(C4.3) - Designers, Builders, and Code Officials Working Together
2022-11-03 13:00 - 14:00 | ONLINE – WEBINAR

MA R3.3 Residential Ventilation Done Right. How and Why.
2022-11-16 13:00 - 14:00 | ONLINE – WEBINAR
Make sure to use the GoToWebinar link to obtain video access, this is required and verified for CEU credit. VIDEO VIEWING IS REQUIRED!
CEUs: 1 AIA, 1 BPI, 1 CSL (Topic – Code), 1 Building Official
Residential Webinar – Residential Ventilation Done Right. How and Why.
COURSE DESCRIPTION:
Part 1 and 2 Mechanical ventilation is as important to indoor air quality as it is for energy conservation. The second part of the course will cover 2018 IECC, IRC, and Massachusetts amendments relating to whole-house mechanical ventilation system requirements. This will include when whole-house ventilation is required, how to calculate the minimum design airflow rate, and how to verify installed airflow rates. The presenter will also provide an overview of different ventilation systems – exhaust only, supply-only and balanced ventilation (including ERVs/HRVs) – along with pros and cons of each type of system.
LEARNING OBJECTIVES:
-Ventilation Types
-Why Ventilate
-Calculating Ventilation amount

MA- C1.1 Shining a Light On Commercial Building Solar Ready Requirements
2022-11-16 14:05 - 15:05 | ONLINE – WEBINAR
Make sure to use the GoToWebinar link to obtain video access, this is required and verified for CEU credit. VIDEO VIEWING IS REQUIRED!
CEU’s: 1 CSL (Topic – Energy), 1 AIA, 1 BPI, 1 Code Official
COURSE DESCRIPTION 1.1
A new requirement in the MA 780 CMR 9th Edition, Chapter 13 code amendments require all commercial new construction subject to that code to be designed and constructed to be “Solar-Ready”. This requirement is to ensure that future building infrastructure can take advantage of a market that is expected to become more conducive to renewable energy. This 1-hour presentation further expands on the requirements with guidance for code officials as to what they should expect to look for in plan reviews and site inspections. Draft checklists for those criteria will also be unveiled and reviewed for additional comments and enhancement, for use by code officials and other construction stakeholders.

R4.1 - Stretch Code Overview and Compliance Options
2022-12-14 13:00 - 14:00 | ONLINE – WEBINAR
Make sure to use the GoToWebinar link to obtain video access, this is required and verified for CEU credit. VIDEO VIEWING IS REQUIRED!
CEU’s: 1 CSL (Topic – Code), 1 AIA, 1 BPI, 1 Code Official
COURSE DESCRIPTION:
This course discusses energy code provisions specific to the Massachusetts stretch code, including the three available compliance paths – RESNET HERS, Passive House and ENERGY STAR. The presenter will also discuss how renewable energy tradeoffs for technologies such as solar PV, solar thermal systems, clean biomass stoves, or renewable primary heating systems. Available software programs and required documentation for each of these compliance paths will be examined.
LEARNING OBJECTIVES:
Learning Objective 1:
Identifies the Massachusetts residential stretch energy code document and software requirements
Learning Objective 2:
Discusses and identifies the requirements in order to meet the RESNET HERS energy code compliance path
Learning Objective 3:
Discusses and identifies the requirements in order to meet the Energy Star energy code compliance path
Learning Objective 4:
Discusses and identifies the requirements in order to meet the Passive House energy code compliance path
